Diamond Nail File

With V-Sharp A4, V-Sharp A4 ELITE, V-Sharp CLASSIC II, dem V-Sharp CLASSIC II ELITE sowie dem V-Sharp XTREME EDGE the sanding units are attached to the upper end and can be easily removed by hand or with the tip of a knife. If you want to use a sanding unit with a different grit, you can quickly replace it.

The V-Sharp Curve is the only knife sharpener from Warthog that does not offer this option, as the two 325 grinding units are permanently installed here.

30 Degrees (A4, A4 ELITE, CLASSIC II, CLASSIC II ELITE, XTREME EDGE):
The angle for rough work - intended use: working knives, chopping knives and knives used for cutting cardboard, cables, wood, ropes or opening cans.

25 Degrees (A4, A4 ELITE, CLASSIC II, CLASSIC II ELITE, XTREME EDGE): Sharper cutting edge - Intended use: butcher's knife, kitchen knife, honing knife, pocket knife, hunting knife.

20 Degrees (A4, A4 ELITE, CLASSIC II, CLASSIC II ELITE, XTREME EDGE):
Sharp but fine cutting edge - Not suitable for hard cutting boards, especially for filleting knives, razors, paring knives and fine cutting.

17 Degrees (XTREME EDGE):
A sharp blade, even when travelling - perfect for filleting knives, Japanese knives and all blades that tend to come into contact with soft materials.

15 Degrees (A4, A4 ELITE):
For an even finer blade - Perfect for filleting knives, Japanese knives and all blades that tend to come into contact with soft materials.

The sanding angle can only be adjusted on the V-Sharp A4, A4 ELITE, CLASSIC II, CLASSIC II ELITE and the XTREME EDGE. The V-Sharp CURVE has a fixed sanding angle of 25 degrees.

325 grit:
Coarse - Perfect for a very blunt blade. The coarse grit removes a lot of material and quickly evens out any unevenness in the blade. Well suited for many blades, especially for work knives and for private use.

600 grit:
Medium - Best suited for an already sharpened blade. Gives the blade an even sharper edge. For finer blades and finer work. The blade sharpness does not last as long as a coarser ground blade.

1000 grit:
Fine - For maximum blade sharpness. The very fine grit allows the blade to be ground very sharp. Perfect for Japanese knives and very delicate cuts.

Yes, the V-Sharp A4, V-Sharp A4 ELITE, V-Sharp CLASSIC II und dem V-Sharp CLASSIC II ELITE can also be used to sharpen serrated knives (e.g. bread knives).
For knives with a serrated edge on one side:
Here, the angle is set to 30° on the side of the serration and 20° on the other side. Then go through each individual serration and move the knife up and down 10-15 times.

However, the separately available ceramic grinding units are required for this.